Display deviceDisplay system3 LCD system
Size of effective display area1” x 3 BrightEra LCD Panel, Aspect ratio: 16:10
Number of pixels6,912,000 (1920 x 1200 x 3) pixels
ResolutionWUXGA (1920 x 1200 pixels)
FocusPowered/Manual(Depend on lens)
Zoom - Powered/ManualPowered/Manual(Depend on lens)
Zoom - RatioDepend on Lens
Throw ratioDepend on Lens
Lens shift - Powered/ManualPowered
Lens shift - Range Vertical/HorizontalRange Vertical: Depend on Lens
Range Horizontal: Depend on Lens
Filter replacement cycle (Max.)
Filter replacement cycle (Max.)10,000 H (service maintenance)
Screen sizeDepend on Lens
Mode: Standard (Centre)9,800lm *3
Contrast ratio (full white / full black)Contrast ratio (full white / full black) : ∞ : 1
Displayable scanning frequency
Horizontal15 kHz to 92 kHz
Accepted signal resolution
Computer signal inputMaximum signal resolution: 1920 x 1200
Video signal input480/60i, 576/50i, 480/60p, 576/50p, 720/60p, 720/50p, 1080/60i, 1080/50i
The following items are available for digital signal only; 1080/60P, 1080/50p, 1080/24p, 1080/30p *4
Keystone correction (Max.)
INPUT OUTPUT (Computer/Video/Control)
INPUT ARGB / Y PB PR input connector: 5 BNC (female)
INPUT BRGB input connector: Mini D-sub 15-pin (female)
INPUT CDVI input connector: DVI-D 24-pin (single link), HDCP support
INPUT DHDMI input connector: HDMI 19-pin, HDCP support
INPUT EHDBaseT interface connector: RJ45, 3 play
INPUT FOptional adaptor slot for 3G-SDI Input Adaptor (BKM-PJ20)
OUTPUT 1Monitor output for Input A/Input B Connector: Mini D-sub 15-pin (female)
USB-2Type-B x 1 (for service)
REMOTED-sub9pin male/RS232C
LANRJ45, 10BASE-T/100BASE-TX/1000BASE-T
Light output mode: Standard39dB
Light output mode: Middle39dB
Operating temperature / Operating humidity
Operating temperature / Operating humidity0°C to 45°C (32°F to 109°F) / 20% to 80% (no condensation)
Storage temperature / Storage humidity
Storage temperature / Storage humidity-10°C to +60°C (14°F to +140°F) / 20% to 80% (no condensation)
Power requirementsAC 100 V to 240 V, 8.4 A to 3.4 A, 50 Hz / 60 Hz
Power Consumption (Standby Mode)
AC 100 V to 120 V0.50W (when “Standby mode” is set to “Low”）
AC 220 V to 240 V0.50W (when “Standby mode” is set to “Low”）
Power Consumption (Networked Standby Mode)
AC 100 V to 120 V21.6W (LAN)
26.6W (ALL Terminals and Networks Connected, when "Standby Mode" is set to "Standard")
AC 220 V to 240 V21.3W (LAN)
26.6W (ALL Terminals and Networks Connected, when "Standby Mode" is set to "Standard")
Standby Mode / Networked Standby Mode Activated
Standby Mode / Networked Standby Mode ActivatedApprox. 2 Minutes
AC 100 V to 120 V2866 BTU/h
AC 220 V to 240 V2777 BTU/h
Dimensions (W x H x D) (without protrusions)
Dimensions (W x H x D) (without protrusions)Approx. 544 x 205 x 564 mm
(21 13/32 x 8 1/16 x 22 7/32 inches)
MassApprox. 26 kg (58 lb)
Projection LensVPLL-Z4107, 4008, Z4111, Z4015, Z4019, Z4025, Z4045
VPLL-Z4107Throw Ratio: 0:75:1 to 0:94:1
Lens Shift - Range Vertical: +/-50%
Lens Shift - Range Horizontal: +/-24%
VPLL-4008Throw Ratio: 1:00:1
Lens Shift - Range Vertical: +/-32%
Lens Shift - Range Horizontal: +/-15%
VPLL-Z4111Throw Ratio: 1:30:1 to 1:96:1
Lens Shift - Range Vertical: +/-99%
Lens Shift - Range Horizontal: +/-51%
VPLL-Z4015Throw Ratio: 1:85:1 to 2:44:1
Lens Shift - Range Vertical: +/-98%
Lens Shift - Range Horizontal: +/-51%
VPLL-Z4019Throw Ratio: 2:41:1 to 3:07:1
Lens Shift - Range Vertical: +/-107%
Lens Shift - Range Horizontal: +/-57%
VPLL-Z4025Throw Ratio: 3:02:1 to 5:58:1
Lens Shift - Range Vertical: +/-107%
Lens Shift - Range Horizontal: +/-57%
VPLL-Z4045Throw Ratio: 5.56:1 to 7.5:1
Lens Shift - Range Vertical: +/-107%
Lens Shift - Range Horizontal: +/-57%
*1The figures are approximate. They vary depending on the environment or how the projector is used.
*2The value is in accordance with ISO 21118, and may differ depending on the actual unit. Brightness and contrast vary depending on use conditions and environments.
*3The value is light output measured at center area of screen in Standard mode, and average of all products shipped.
